Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Diameter [mm]: 41
Fitting Side: Front axle; Right
Manufacturer: SRLine
Cone Size [mm]: 14,4
Material: Steel
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: in the bottom; rear axle on both sides
Manufacturer: SRLine
Length [mm]: 557
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front axle; Lower; Left
Outer Diameter [mm]: 76,0
Length [mm]: 144
Inner diameter [mm]: 18,0
Material: Rubber/steel
Manufacturer: SRLine
Availability: Bargain Offer
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front axle; Lower; Right
Outer Diameter [mm]: 76,0
Length [mm]: 144
Inner diameter [mm]: 18,0
Material: Rubber/steel
Manufacturer: SRLine
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Diameter [mm]: 35,0
Material: Aluminium; Rubber/Steel
Manufacturer: SRLine
Inner diameter [mm]: 12,0
Fitting Side: inner; rear axle left; rear axle right
Length [mm]: 57
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Diameter [mm]: 41,4
Thread Measurement 1: MM14x1,5R
Cone Size [mm]: 14,8
Fitting Side: front axle, bottom; outer
Manufacturer: SRLine
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Diameter [mm]: 41,4
Thread Measurement 1: MM12x1,5R
Cone Size [mm]: 14,4
Fitting Side: Front Axle; Outer
Manufacturer: SRLine
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Diameter [mm]: 41
Fitting Side: Front axle; Left
Manufacturer: SRLine
Cone Size [mm]: 14,4
Material: Steel
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: SRLine
Fitting Side: Front Axle Right; Front Axle; front axle left
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front axle; Left/Right
Manufacturer: SRLine
Constituent parts: assembly
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Length [mm]: 100
Manufacturer: SRLine
Fitting Side: Rear Axle
Constituent parts: assembly
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 14,4
Material: Steel
Availability: Bargain Offer
Outer Diameter [mm]: 41
Fitting Side: Front axle; Left
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 14,4
Material: Steel
Outer Diameter [mm]: 41
Fitting Side: Front axle; Right
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: in the bottom; rear axle on both sides
Manufacturer: TEKNOROT
Length [mm]: 557
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front Axle Right; Front Axle; front axle left
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Diameter [mm]: 41,4
Thread Measurement 1: MM14x1,5R
Cone Size [mm]: 14,8
Fitting Side: front axle, bottom; outer
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Diameter [mm]: 41,4
Thread Measurement 1: MM12x1,5R
Cone Size [mm]: 14,4
Availability: Bargain Offer
Fitting Side: Front Axle; Outer
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Constituent parts: assembly
Fitting Side: Front axle; Left/Right
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Rear Axle
Constituent parts: assembly
Length [mm]: 100
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 18,0
Material: Rubber/steel
Constituent parts: assembly
Fitting Side: Front axle; Lower; Right
Outer Diameter [mm]: 76,0
Length [mm]: 144
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 18,0
Material: Rubber/steel
Constituent parts: assembly
Fitting Side: Front axle; Lower; Left
Outer Diameter [mm]: 76,0
Length [mm]: 144
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 18,0
Material: Rubber/steel
Availability: Bargain Offer
Fitting Side: Front axle; Left/Right
Outer Diameter [mm]: 60,5
Manufacturer: TEKNOROT
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!
Model: Z1 Roadster, 06.88-06.91
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Diameter [mm]: 35,0
Material: Aluminium; Rubber/Steel
Manufacturer: FEBI
Inner diameter [mm]: 12,0
Fitting Side: inner; rear axle left; rear axle right
Length [mm]: 57
Used: : 06.1988-06.1991
IMPORTANT! Specification: : Open / Close here!