Control arm bush

AC-2172223

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Outer Diameter [mm]: 27,0; 60,0

Material: Aluminium; Rubber/Steel

Inner diameter [mm]: 17,0

Fitting Side: in the bottom; Front Axle Right; front axle left; in rear

Manufacturer: SRLine

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Stabilizer link

AC-2102480

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Thread Measurement 2: M12x1.75

Fitting Side: front axle on both sides

Length [mm]: 75

Manufacturer: SRLine

Thread type: With right-handed thread

Constituent parts: assembly

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Axial joint

AC-2284786

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Thread Measurement 1: M14x1.5

Thread Measurement 2: M12x1

Thread type: With right-handed thread

Manufacturer: SRLine

Availability: Bargain Offer

Fitting Side: Front Axle; Inside

Length [mm]: 363,5

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm ball joint

AC-2646600

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Cone Size [mm]: 17

Manufacturer: SRLine

Fitting Side: Front axle; Lower

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm

AC-525790

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Fitting Side: Front axle; Lower; Left

Constituent parts: assembly

Cone Size [mm]: 17

Material: Sheetsteel

Manufacturer: SRLine

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm

AC-725790

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Fitting Side: Front axle; Lower; Right

Constituent parts: assembly

Cone Size [mm]: 17

Material: Sheetsteel

Manufacturer: SRLine

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm ball joint

AC-2160840

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Cone Size [mm]: 19

Length [mm]: 70

Fitting Side: in the bottom; front axle, both sides

Manufacturer: SRLine

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm

AC-783038

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Fitting Side: Front axle; Lower; Left

Material: Sheetsteel

Manufacturer: TEKNOROT

Cone Size [mm]: 17

Constituent parts: assembly

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm

AC-795438

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Fitting Side: Front axle; Lower; Right

Material: Sheetsteel

Manufacturer: TEKNOROT

Cone Size [mm]: 17

Constituent parts: assembly

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Power steering pump - new

AC-2184623

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Quality: 4. TÜV Rheinland ; Din ; Dot

Operating pressure [bar]: 90

Pressure Hose Connector Thread Size: M16

Adapter Form: triangular

Mounting points diameter [mm]: 8

Pulleys: without pulley

Operating Mode: Hydraulic

Distance from adapter to pump [mm]: 32

Manufacturer Restriction: ZF

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Power steering pump - new

AC-2722703

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Quality: 4. TÜV Rheinland ; Din ; Dot

Backflow Connector Thread Size: M16x1,5

Distance from adapter to pump [mm]: 32

Mounting points diameter [mm]: 8

Manufacturer Restriction: KAYABA

Adapter Form: triangular

Operating pressure [bar]: 80

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Power steering pump - new

AC-2399023

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Quality: 4. TÜV Rheinland ; Din ; Dot

Manufacturer Restriction: SAGINAW

Adapter Form: triangular

Mounting points diameter [mm]: 8

Pressure Hose Connector Thread Size: M16

Distance from adapter to pump [mm]: 32

Pulleys: without pulley

Operating pressure [bar]: 90

Operating Mode: Hydraulic

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Tie rod end

AC-750630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Length 1 [mm]: 80

Thread Measurement 1: M12x1

Thread Measurement 2: M12x1.5

Fitting Side: Front Axle; Outer; Left/Right

Manufacturer: TEKNOROT

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm ball joint

AC-150630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Cone Size [mm]: 17

Manufacturer: TEKNOROT

Fitting Side: Front axle; Lower

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Axial joint

AC-650630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Thread Measurement 1: M14x1.5

Thread Measurement 2: M12x1

Thread type: With right-handed thread

Manufacturer: TEKNOROT

Availability: Bargain Offer

Fitting Side: Front Axle; Inside

Length [mm]: 363,5

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm bush

AC-966630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Manufacturer: TEKNOROT

Availability: Bargain Offer

Inner diameter 1 [mm]: 18

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm bush

AC-366630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Manufacturer: TEKNOROT

Availability: Bargain Offer

Inner diameter 1 [mm]: 18

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm bush

AC-066630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Inner diameter 1 [mm]: 12

Manufacturer: TEKNOROT

Outer Diameter 1 [mm]: 32

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm ball joint

AC-185030

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Cone Size [mm]: 19

Length [mm]: 70

Fitting Side: in the bottom; front axle, both sides

Manufacturer: TEKNOROT

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Stabilizer link

AC-556250

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Thread Measurement 2: M12x1.75

Fitting Side: front axle on both sides

Length [mm]: 75

Manufacturer: TEKNOROT

Thread type: With right-handed thread

Constituent parts: assembly

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Suspension beam bush

AC-2872460

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): REAR

Side (Left/Right): LEFT=RIGHT

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Availability: Bargain Offer

Fastening type: Bushing

Manufacturer: TEKNOROT

Fitting Side: Rear Axle

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm bush

AC-096630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Material: Aluminium; Rubber/Steel

Fitting Side: in the bottom; Front Axle Right; front axle left; in rear

Manufacturer: TEKNOROT

Outer Diameter [mm]: 27,0; 60,0

Inner diameter [mm]: 17,0

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm ball joint

AC-150630

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Cone Size [mm]: 17

Manufacturer: TEKNOROT

Fitting Side: Front axle; Lower

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!

Control arm ball joint

AC-185030

Model: CADDY II pick-up (9U7), 06.96-12.00

Sales Unit: packing unit: 1 pc

Location (Front/Rear): FRONT

Side (Left/Right): LEFT=RIGHT

Control arm type: Lower

Manufacturer:

Quality: 4. TÜV Rheinland ; Din ; Dot

Cone Size [mm]: 19

Length [mm]: 70

Fitting Side: in the bottom; front axle, both sides

Manufacturer: TEKNOROT

Used: : 06.1996-12.2000

IMPORTANT! Specification: : Open / Close here!