Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Diameter [mm]: 33,0; 40,0
Inner diameter [mm]: 12,0
Material: Rubber/steel
Fitting Side: in the bottom; Front Axle Right; front axle left; in front
Fastening type: Bushing
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 21,0
Fitting Side: in the bottom; Front Axle Right; front axle left; in rear
Manufacturer: SRLine
Outer Diameter [mm]: 63,0; 71,0
Material: Rubber/Steel; Plastic
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Installation speciality!: Check the suitability of the VIN and OE code!
Operating Mode: Hydraulic
Connector Shape: Oval
Technical Remarks: A very rare version of the steering rack in Estonia!
Manufacturer Restriction: TRW
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Operating Mode: Hydraulic
Connector Shape: Oval
Manufacturer Restriction: TRW
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 2: M10x1.5
Constituent parts: assembly
Fitting Side: Front Axle
Length [mm]: 270
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Material: Sheetsteel
Fitting Side: Front axle; Left/Right
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fastening type: Bushing
Fitting Side: rear axle on both sides
Manufacturer: SRLine
Outer Diameter [mm]: 72,0
Material: Rubber/steel
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M14x1,5
Thread Measurement 2: M12X1,5
Fitting Side: Front Axle; Outer; Left
Manufacturer: SRLine
Cone Size [mm]: 16
Length [mm]: 94
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M14x1,5
Thread Measurement 2: M12X1,5
Fitting Side: Front Axle; Outer; Right
Cone Size [mm]: 16
Manufacturer: SRLine
Length [mm]: 94
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 18,17
Length [mm]: 66
Fitting Side: Front axle; Lower; Left
Thread Size: M12x1.5
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 18,17
Length [mm]: 66
Fitting Side: Front Axle; Lower; Right
Thread Size: M12x1.5
Manufacturer: SRLine
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Material: Sheetsteel
Fitting Side: Front axle; Left/Right
Manufacturer: TEKNOROT
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer Restriction: TRW
Constituent parts: assembly
Used: : 07.2003-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Technical Remarks: A very rare version of the steering rack in Estonia!
Manufacturer Restriction: TRW
Installation speciality!: Check the suitability of the VIN and OE code!
Operating Mode: Hydraulic
Connector Shape: Oval
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M14x1,5
Thread Measurement 2: M12X1,5
Length [mm]: 94
Manufacturer: TEKNOROT
Fitting Side: Front Axle; Outer; Right
Cone Size [mm]: 16
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M14x1,5
Thread Measurement 2: M12X1,5
Fitting Side: Front Axle; Outer; Left
Manufacturer: TEKNOROT
Length [mm]: 94
Cone Size [mm]: 16
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 18,17
Fitting Side: Front Axle; Lower; Right
Manufacturer: TEKNOROT
Thread Size: M12x1.5
Length [mm]: 66
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 18,17
Fitting Side: Front axle; Lower; Left
Manufacturer: TEKNOROT
Thread Size: M12x1.5
Length [mm]: 66
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 2: M10x1.5
Fitting Side: Front Axle
Length [mm]: 270
Manufacturer: TEKNOROT
Constituent parts: assembly
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Thread 1 [mm]: M16x1.5
Length [mm]: 378
Manufacturer: TEKNOROT
Cone Size [mm]: 16
Outer Thread 2 [mm]: M12x1.5
Inner Thread [mm]: M14x1.5
Constituent parts: assembly
Fitting Side: Front Axle; Right
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Thread 1 [mm]: M16x1.5
Length [mm]: 378
Manufacturer: TEKNOROT
Cone Size [mm]: 16
Outer Thread 2 [mm]: M12x1.5
Inner Thread [mm]: M14x1.5
Constituent parts: assembly
Fitting Side: Front Axle; left side
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Rear Axle
Availability: Bargain Offer
Fastening type: Bushing
Manufacturer: TEKNOROT
Used: : 09.2002-04.2012
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Material: Rubber/Steel; Plastic
Inner diameter [mm]: 21,0
Outer Diameter [mm]: 63,0; 71,0
Fitting Side: in the bottom; Front Axle Right; front axle left; in rear
Manufacturer: TEKNOROT
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Fastening type: Bushing
Fitting Side: in the bottom; Front Axle Right; front axle left; in front
Manufacturer: TEKNOROT
Inner diameter [mm]: 12,0
Outer Diameter [mm]: 33,0; 40,0
Material: Rubber/steel
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!
Model: POLO IV sedan (9A4, 9A2, 9N2, 9A6), 09.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fastening type: Bushing
Fitting Side: rear axle on both sides
Manufacturer: TEKNOROT
Outer Diameter [mm]: 72,0
Material: Rubber/steel
Used: : 09.2002-
IMPORTANT! Specification: : Open / Close here!