Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: SRLine
Outer Diameter [mm]: 80,7
Thread Size: M20X1,5
Seal Diameter [mm]: 50,8
Machined: with groove in inner element (inside)
External Teeth, wheel side: 22
Internal Teeth, wheel side: 30
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: SRLine
Outer Diameter [mm]: 80,65
Thread Size: M20X1,5
Seal Diameter [mm]: 51,5
For OE number: 6N0498099
Machined: with groove in inner element (inside)
External Teeth, wheel side: 22
Internal Teeth, wheel side: 30
Length [mm]: 129,5
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: SRLine
Outer Diameter [mm]: 94
Int.teeth, diff.side, conn.to conn.shaft: 33
Bore Ø [mm]: 8,2
Length [mm]: 32
Machined: with groove in inner element (inside)
Pitch Circle Ø [mm]: 78
Int. teeth, diff.side, conn.to transm.: 33
Number of Bores: 6
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Length [mm]: 32
Outer Diameter [mm]: 92
Int.teeth, diff.side, conn.to conn.shaft: 33
Number of Bores: 6
Manufacturer: SRLine
Machined: with groove in inner element (inside)
Pitch Circle Ø [mm]: 78
Bore Ø [mm]: 8,3
Used: : 04.1974-12.1983
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Height [mm]: 131
Manufacturer: EAI
Inner diameter 1 [mm]: 22
Inner Diameter 2 [mm]: 95
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Height [mm]: 110
Availability: on offer soon
Inner diameter 1 [mm]: 26
Fitting Side: Wheel side
Manufacturer: ERT
Inner Diameter 2 [mm]: 78
Used: : 04.1974-12.1983
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Height [mm]: 99
Availability: on offer soon
Manufacturer: ERT
Inner diameter 1 [mm]: 22
Inner Diameter 2 [mm]: 94
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Height [mm]: 130
Manufacturer: ERT
Fitting Side: Wheel side
Inner Diameter 2 [mm]: 81
Inner diameter 1 [mm]: 22
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Diameter 1 [mm]: 81
Length [mm]: 752
Availability: ON ORDER ONLY (without right to return)
External Teeth, wheel side: 22
Manufacturer: EAI
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: MAGNETI MARELLI
Fitting Side: Front Axle
Used: : 01.1983-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 2. OEM/OES
Height [mm]: 146
Manufacturer: SKF
Inner diameter 1 [mm]: 22
Inner Diameter 2 [mm]: 86
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 2. OEM/OES
Height [mm]: 146
Manufacturer: SKF
Inner diameter 1 [mm]: 22
Inner Diameter 2 [mm]: 86
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 2. OEM/OES
Height [mm]: 97
Material: Rubber
Manufacturer: SKF
To inner diameter 1 [mm]: 29
Inner Diameter 2 [mm]: 72
Inner diameter 1 [mm]: 22
Inner diameter 1 of [mm]: 22
Inner diameter 2 of [mm]: 72
To inner diameter 2 [mm]: 84
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Length [mm]: 129,7
External Teeth, wheel side: 22
Internal Teeth, wheel side: 30
Seal Diameter [mm]: 53,00
For OE number: 191498099
Manufacturer: ZINNGER
Machined: without groove in internal component
Thread Size: M20X1.5
Joint Diameter (mm): 81,00
Used: : 08.1975-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Length [mm]: 560
Availability: ON ORDER ONLY (without right to return)
External Teeth, wheel side: 22
Manufacturer: EAI
Diameter 1 [mm]: 81
Used: : 04.1974-12.1983
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Length [mm]: 540
Availability: ON ORDER ONLY (without right to return)
External Teeth, wheel side: 22
Manufacturer: EAI
Diameter 1 [mm]: 81
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Diameter 1 [mm]: 81
Length [mm]: 539
Availability: ON ORDER ONLY (without right to return)
External Teeth, wheel side: 22
Manufacturer: EAI
Used: : 01.1983-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front Axle
Availability: ON ORDER ONLY (without right to return)
Manufacturer: MAGNETI MARELLI
Used: : 08.1975-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Availability: ON ORDER ONLY (without right to return)
Fitting Side: Front Axle
Manufacturer: MAGNETI MARELLI
Used: : 08.1975-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front Axle
Availability: ON ORDER ONLY (without right to return)
Manufacturer: MAGNETI MARELLI
Used: : 04.1974-07.1983
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Availability: ON ORDER ONLY (without right to return)
Manufacturer: MAGNETI MARELLI
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 4. TÜV Rheinland ; Din ; Dot
Availability: ON ORDER ONLY (without right to return)
Fitting Side: Front Axle
Manufacturer: MAGNETI MARELLI
Used: : 04.1974-12.1983
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Quality: 2. OEM/OES
Availability: Clearance sale (bargain offer)
Machined: with groove in inner element (inside)
External Teeth, wheel side: 22
Internal Teeth, wheel side: 30
Manufacturer: SKF
Outer Diameter [mm]: 80,7
Thread Size: M20X1,5
Seal Diameter [mm]: 50,8
Used: : 04.1974-02.1984
IMPORTANT! Specification: : Open / Close here!
Model: GOLF I (17), 04.74-12.85
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: ZINNGER
Length [mm]: 32
Int. teeth, diff.side, conn.to transm.: 33
Used: : 04.1974-12.1983
IMPORTANT! Specification: : Open / Close here!