Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Cone Size [mm]: 16
Material: Cast iron
Manufacturer: SRLine
Fitting Side: Front axle; Lower; Left
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Material: Cast iron
Fitting Side: Front axle; Lower; Left
Manufacturer: SRLine
Cone Size [mm]: 19,3
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: TEKNOROT
Fitting Side: Front axle; Lower; Left
Material: Cast iron
Availability: Bargain Offer
Cone Size [mm]: 16
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front axle; Lower; Left
Manufacturer: TEKNOROT
Cone Size [mm]: 19,3
Material: Cast iron
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Manufacturer: SRLine
Fitting Side: Front axle; Lower; Right
Cone Size [mm]: 16
Material: Cast iron
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Material: Cast iron
Fitting Side: Front axle; Right
Manufacturer: SRLine
Cone Size [mm]: 19,3
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Material: Cast iron
Fitting Side: Front axle; Lower; Right
Cone Size [mm]: 16
Availability: Bargain Offer
Manufacturer: TEKNOROT
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Fitting Side: Front axle; Right
Manufacturer: TEKNOROT
Cone Size [mm]: 19,3
Material: Cast iron
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M16X1.5
Thread Measurement 2: M16X1.5
Fitting Side: Front Axle
Manufacturer: TEKNOROT
Thread type: With right-handed thread
Length [mm]: 332
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M16X1.5
Thread Measurement 2: M16X1.5
Thread type: With right-handed thread
Length [mm]: 332
Availability: Bargain Offer
Fitting Side: Front Axle
Manufacturer: TEKNOROT
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: MM16x1,5R
Fitting Side: Front axle; Lower
Manufacturer: TEKNOROT
Cone Size [mm]: 17
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: MM18x1,5R
Fitting Side: Front axle; Lower
Manufacturer: TEKNOROT
Cone Size [mm]: 19,8
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Male thread size: M12 x 1,25
Manufacturer: TEKNOROT
Fitting Side: Front axle; Left/Right
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 set
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Control arm type: Lower
Quality: 4. TÜV Rheinland ; Din ; Dot
Outer Diameter [mm]: 44,5
Fastening type: Bushing
Inner diameter [mm]: 25
Fitting Side: Front Axle; in front
Manufacturer: TEKNOROT
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Length [mm]: 41,2
Inner diameter [mm]: 23
Manufacturer: TEKNOROT
Availability: Bargain Offer
Fitting Side: (at Front)
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 16
Manufacturer: TEKNOROT
Length [mm]: 87
Outer Diameter [mm]: 50
Fitting Side: Rear Axle; (in Front)
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: MM14x1,5R
Length [mm]: 120
Thread Size: FM16x1,5R
Manufacturer: TEKNOROT
Cone Size [mm]: 17
Fitting Side: Front Axle; Outer
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 16
Fitting Side: Rear Axle; (in Front)
Manufacturer: SRLine
Outer Diameter [mm]: 50
Length [mm]: 87
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Inner diameter [mm]: 16
Fitting Side: Rear axle; (in Rear)
Manufacturer: SRLine
Outer Diameter [mm]: 40
Length [mm]: 46,5
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): REAR
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Male thread size: M10 x 1,25
Material: PU (Polyurethane)
Manufacturer: SRLine
Fitting Side: Rear Axle
Length [mm]: 113
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Operating Mode: Hydraulic
Manufacturer: -
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
Number of Ribs: 6
Operating Mode: Hydraulic
Belt Pulley Ø [mm]: 126
Manufacturer: -
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Quality: 4. TÜV Rheinland ; Din ; Dot
For steering rack manufactures: TRW
Length [mm]: 1410
Operating Mode: Hydraulic
Manufacturer: SRLine
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!
Model: JUMPER I Box (244), 04.02-
Sales Unit: packing unit: 1 pc
Location (Front/Rear): FRONT
Side (Left/Right): LEFT=RIGHT
Quality: 4. TÜV Rheinland ; Din ; Dot
Thread Measurement 1: M16X1.5
Thread Measurement 2: M16X1.5
Length [mm]: 332
Fitting Side: Front Axle
Manufacturer: SRLine
Thread type: With right-handed thread
Used: : 04.2002-06.2006
IMPORTANT! Specification: : Open / Close here!